POWER
50 HP
YUNNEI 490 engine at 2,400 rpm
Official KRD Website
- Customer Service
- Branches & Representatives
- Locations
POWER
50 HP
YUNNEI 490 engine at 2,400 rpm
LOAD
1,000 kg
Maximum load capacity
DIGGING
2.35 m
Maximum digging depth
A total width of 1.60 m and a minimum turning radius of 2.31 m for operation in confined areas.
A 0.6 m³ front bucket and a 0.12 m³ rear bucket for a variety of material handling tasks.
YUNNEI 490 engine with a rated output of 50 HP at 2,400 rpm to power the machine.
Maximum load of 1,000 kg, digging depth of up to 2.35 m and maximum lift height of 3.10 m.
The MR-15 is designed for digging, loading and material handling, particularly in confined spaces.
The MR-15 Mini Backhoe Loader uses a YUNNEI 490 engine with a rated output of 50 HP at a rated speed of 2,400 rpm.
Maximum load capacity is 1,000 kg. The front bucket holds 0.6 m³ and the rear bucket holds 0.12 m³.
Maximum digging depth is 2.35 m. Maximum digging radius is 3.4 m and the rear bucket swing angle is 180°.
The MR-15 measures 5.47 m long, 1.60 m wide and 2.60 m high. Its operating weight is 2,800 kg.
The complete specifications are listed in the Technical Specifications section on this page. The original Portuguese PDF is also available to download there.
Overall length
5.47 m
Overall width
1.60 m
Overall height
2.60 m
Ground clearance
22 cm
Wheelbase
1.60 m
Operating weight
2,800 kg
Engine model
YUNNEI 490
Rated power
50 HP
Rated engine speed
2,400 rpm
Diesel tank
47.5 L
Hydraulic oil tank
47.5 L
Tires
31/15 — 12-ply
Front bucket width
1.60 m
Front bucket height
0.75 m
Front bucket length
0.47 m
Front bucket capacity
0.6 m³
Dump height
2.3 m
Loader arm H dimension
1.86 m
Rear bucket width
0.22 m
Rear bucket height
0.48 m
Rear bucket length
0.42 m
Rear bucket capacity
0.12 m³
Maximum digging radius
3.4 m
Maximum digging depth
2.35 m
Maximum digging height
3.0 m
Swing angle
180°
Hydraulic system pressure
16 MPa
Maximum travel speed
25 km/h
Minimum turning radius
2.31 m
Maximum lift height
3.10 m
Maximum load capacity
1,000 kg
POWER
50 HP
YUNNEI 490 engine with a rated speed of 2,400 rpm.
MAXIMUM LOAD
1,000 kg
Maximum load capacity according to the technical data sheet.
DIGGING
2.35 m
Maximum digging depth with the rear bucket.
VERSATILITY
Two Buckets
0.6 m³ front bucket and 0.12 m³ rear bucket.
MR-15 combines front loading and rear digging in a compact machine, 1.60 m wide, for material handling and operation in confined spaces.
Specifications are based on the MR-15 Mini Backhoe Loader data sheet supplied by KRD. Equipment selection and operation should take application conditions into account.
Download Original Data Sheet (Portuguese PDF)